FOME Fuel and Ignition Cut Codes ("Clear Reason")

The log channels Fuel: Cut Code and Ign: Cut Code indicate why fuel or spark is being cut using one of the codes below. These are not necessarily errors, but just indicate why the particular cut was performed.

Code	enum ClearReason	TunerStudio Text	Description
0	None	None	No fuel/ignition cut active
1	Fatal	Fatal Error	Disabled due to fatal error
2	Settings	Setting Disabled	Disabled by setting:isInjectionEnabled/isIgnitionEnabled
3	HardLimit	RPM Limit	Disabled by hard (normal) RPM limit:useCltBasedRpmLimit/cltRevLimitRpmBins/cltRevLimitRpm/rpmHardLimit/rpmHardLimitHyst
4	FaultRevLimit	Fault RPM Limit	Disabled by (fault) RPM limit
5	BoostCut	Boost Cut	Disabled by boost cut pressure threshold:boostCutPressure
6	OilPressure	Oil Pressure	Disabled due to low oil pressure after 5 seconds:minOilPressureAfterStart
7	StopRequested	Stop Requested	Disabled due to engine stop request
8	EtbProblem	ETB Problem	Disabled due to detected ETB jam or control problem
9	LaunchCut	Launch Control	Disabled by launch control RPM retard condition: launchRpm/launchFuelCutEnable/launchSparkCutEnable/launchControlEnable
10	InjectorDutyCycle	Max Injector Duty	Disabled due to injector duty cycle limits: maxInjectorDutyInstant/maxInjectorDutySustained/maxInjectorDutySustainedTimeout. Resets after falling below 20% duty.
11	FloodClear	Flood Clear	Disabled to allow flood clear mode: isCylinderCleanupEnabled enabled and TPS > 95% while cranking
12	EnginePhase	Engine Sync	Disabled due to lacking engine-cam sync to avoid non-sync spark on engines with symmetrical crank (NB2, Nissan VQ/MR) or odd firing order (VTwin Harley, Viper)
14	IgnitionOff	Ignition Off	The ignition switch is turned off
15	Lua	Lua requested	A Lua script requested a cut
17	LambdaProtection	Lambda protect	Lambda protection cut to protect the engine. Lambda was leaner than the configured allowed for the current operating condition.